Celtic Sticker Placement: Dice Bags, Trays & Cases
By Misty Mountain Gaming - #1 Gemstone, Glass, & DnD Dice | Published: 2026-11-03
Category: How-to Guides
Place Celtic stickers on flat, low-flex panels of dice bags, trays, and cases. Clean and dry the surface, then press from the center outward to keep knotwork crisp and avoid peeling.
Quick answer
Place your Celtic sticker on a flat, low-flex panel of your dice bag, tray lid, or hard case rather than on curved corners or fabric seams. Clean and dry the surface first, then press from the center outward so the knotwork stays crisp.
Why placement matters more with knotwork designs
Celtic knotwork is made of thin, interlocking lines, so any bubble or crease breaks the pattern visually. Flat, rigid surfaces let the sticker sit flush and keep the design readable.
Soft dice bags flex when you open and close them. A sticker placed across a fold line will lift at the edges over time, even if it looks fine on day one.
Surfaces that work and surfaces that fight back
Hard plastic trays, laptop lids, water bottles, and dice case panels are reliable because they do not stretch. Fabric bags can work if you choose a flat panel away from the drawstring channel and seams.
Textured or matte surfaces may hold a sticker less aggressively than smooth ones. If the surface feels powdery or oily, clean it and let it dry fully before applying.
How to place your Celtic sticker step by step
- Choose a flat panel, not a fold: Pick a spot on your dice bag, tray lid, or case that stays flat when the item opens and closes. On a bag, avoid the drawstring channel and side seams. Common mistake: placing the sticker across a fold line so it peels the first time the bag flexes. Run your thumb across the spot; if the surface bends or wrinkles, choose another location.
- Clean and dry the surface: Wipe the area with a dry or slightly damp cloth to remove dust and oils, then let it dry completely. Common mistake: applying over dust or hand oil, which stops the adhesive from bonding. Wait until the surface feels dry to the touch before moving on.
- Peel and position from one edge: Peel the sticker from a corner and align one edge with the surface before pressing down. Keep the rest of the sticker slightly lifted so you can adjust. Common mistake: dropping the whole sticker at once and trapping air under the design. If the sticker touches down in the wrong spot, lift it slowly from the nearest corner rather than pulling hard.
- Press from the center outward: Once aligned, press from the middle of the sticker toward the edges with your thumb or a soft cloth. Work out any air bubbles as you go. Common mistake: pressing only the edges, which leaves a bubble in the middle of the knotwork. Check the design under light; small bubbles often disappear with a second firm press.
- Let it set before heavy use: Leave the item flat for a few minutes before stuffing it into a bag or rolling it around. Common mistake: immediately cramming the dice bag full, which can lift the sticker edges before the adhesive settles. If you place it on a water bottle, hand-wash around the sticker rather than soaking it.
Product facts
- Celtic Sticker – Dice Around the World Collection: The Celtic Sticker is a premium sticker with a bold, detailed Celtic design, intended for personalizing a dice case, laptop, water bottle, or similar gear. Because the design is detailed, applying it to a flat, clean surface keeps the knotwork sharp instead of distorted by curves or creases.
Celtic Sticker – Dice Around the World Collection
